Ceiling fans are considered the part and parcel of every house. The function of them is to help in cooling a particular space where it is installed. They are available in different forms and have become more advanced with the passage of time because of smart technology.
Kichler is one of those brands that is available in the market due to its amazing features and it will never disappoint you in terms of performance because they are designed it that way.
All you need to do is to save some money, and you will get all the benefits associated with it.
How to Fix Kichler Ceiling Fan Remote Not Working?
These days, even ceiling fans have a remote that helps the user to control the fan from wherever he would like. However, some users have been reporting that their Kichler ceiling fan remote is not working.
That is the reason they have no idea what they need to do. This article will help you to deal with it as it contains solutions on how you can fix this problem for good. All the troubleshooting steps for Kichler fan remote are available below in this guide:
- Examine the Remote for Any Problems
If your Kichler remote is not working or responding, then you should check the remote first.
The reason could be the lack of power as your remote is not getting it and that is why it is not working. Anyhow, you will have to find out whether it is turning on or not, responding or not.
The issue could be with the remote’s batteries as they are out of power. In that case, you will have to purchase a new set of batteries for it.
- The Issue Could Be with Your Fan!
It could be the cause why your Kichler remote is not working is because the fan is not getting any signals from the controller.
That is the reason, you need to inspect your fan in order to find the possible reasons that are causing the issues.
Our recommendation is to begin with the capacitor of the fan.
Also, make sure that whether the fan works without the remote or not. If it working fine without it, then the remote is the culprit.
- Troubleshoot Faulty Remote
Your remote could be faulty which is not working because of a technical problem. In some cases, the users get a faulty remote from the package.
This can also be the problem with you as we have seen such cases.
Either way, you will need to check your remote, or try to get a new one to see if it works. In short, you may have to get a remote replacement to make it work.
- Check the Signal Range
After that, you need to examine the range’s problems. It is same as any other smart remote, you have to keep in mind the effective range when it comes to sending a response.
You cannot come in contact with a transmitter wherever you want and you need to fix the alignment to make it happen.
So, if you come to know that there are no problems in remote’s hardware, just maintain the possible range between your appliances.
You need to ensure the range between the transmitter and the receiver to not exceed 15 feet, and that will be sufficient to access the unit.
However, if you think there is no issue with the range, then the problem might be related to the pairing.
You are either dealing with the bugs in it or the DIP switches may be causing the issue.
So, you need to find out what is wrong with it.
- Try Power Cycling Through The Remote
It is not the best solution to cycle power through the remote, but it has proven to be helpful for a lot of home owners. So, it is another step you can take with your remote too.
The only thing you have to do is to remove all the power from the remote.
It does not mean that you have to turn on or off the fan from the buttons. It means that you have to remove the battery to ensure there is no power going to remote.
From there, you need to keep the battery outside of remote for a few minutes and after that, put them back inside.
The problem will be resolved here, 9 out of 10. However, if you are not confident about the situation and the issue persists, then you will have to a look at the DIP switches.
- Change the DIP Switch settings
At times, when you try to replace the remote batteries or examining the wiring connections to the receiver, it can cause issues with the DIP switch codes.
To understand the situation better, you will have to add or remove the DIP clips.
The remote will fail to run unless it matches the code on the receiver, and you will keep having problems connecting it.
So, first of all examine the installation and then check the DIP switches if it needs to be redefined.
If you are not familiar with the process of defining the code for the dip switches, then get help from an expert to speed it up.
There is no point of trying it if you are not confident about the procedure of setup.
So, all you have to do is to contact the dealer or local contractors and they will help you with the setup. On the other hand, you can also find the details in the manual if you are not able to find the solution.
- Check The Receiver
If the issue still persists, our suggestion is to check the receiver. It is very common that the receiver gets damaged while going through the installation. It usually happens when you are trying to do it yourself. So, if you are one of those, just check the receiver.
If you are able to find the culprit due to its visible cracks, then your hands are tied. You will have to get the help from a certified.
There is no solution for it, and getting help from a professional will be the only solution.
The main benefit of these units is the warranty deal which is awesome. If you think that the damage has been done during delivery, then you are covered for any of these damages.
Contacting the dealer and make them in charge of the situation will be the best way of dealing with it.
He will ask you about the setup and verify that if you are the original purchaser. It can take a while to complete the verification process and you can also use your receipt number to make the process easier.
After that, you will get a new fan as a replacement within a week. Hopefully, you will get all the pieces in original condition when you get the new one, and it will remain there for a long time.
- Get Help from Official Support
Lastly, if you do not have a valid warranty to claim, there is no shame to contact the dealer.
The troubleshooting job will be faster and easier with the help of these professionals, and you do not have to deal with any problems on your side.
All you need to do is to reach them through call or contact them through a support ticket to explain the problem.
Whatever medium you use, you will get assistance from an expert who will restrict the troubleshooting of hours. So, if you are not able to find a solution, contact official support by calling them.
If your issue is complicated, they might help you to get a replacement for your remote. So, go ahead and get a response from them.
The Last Words
This article has covered all the helpful information that you can use to learn about the Kichler ceiling fan remote not working.
You need to follow the exact instructions provided in the article above. You can avoid the complications by simply reading the above guide and it will fix your issue.
The maximum issues reported with the fan were related to the batteries issue rather than the hardware.
If the remote of your fan was working fine until now, then there is a high chance that you might be one of them. All you need to fix it is get a new pair of batteries.
In this case, fixing the model will be easier if the issue is not pertaining to hardware. Alternatively, if you are able to see the cracks and frayed sections on the remote clearly, then it is damaged and you need to get a new unit.
There are no quick ways to fix this type of issue.
The best way to get a replacement is to call the dealer. He will first verify your purchase and then guide you the right procedure.
It all depends on the way you are going to use to tackle this situation. So, when you are not able to address it, you should ask the dealer instead of doing it yourself.
Related Posts:
Monte Carlo Fan Remote Not Working
